KEEP ME IN THE LOOP – SEND ME UPDATES FOR THIS PAGE
11 responses to “Discussion & Comments”
Today January 1st 2021 is the official launch date of my build site, nicks33hotrod.ca
You can leave comments, sign up for updates and watch the final stages of this 8 year project.
I used 14362’s but the 11365 is the same just not polished finish.
They are a bit shorter and wider but using their clamps you can make up the difference. Hangers etc all have to be re-thought too.
I used a pipe speader to install them so that the joints all pointing down stream, but i doubt it makes a difference.
Basically it’s not just a slip in change but not difficult.
You can hear them here – https://youtu.be/V_RpNbKkxU8
I just did a Barrymans tuneup (Seafoam/Barrymans) OMG god the smoke! The car has been sitting for 2 years so i figures things may be stuck a bit LOL
what are you planning to do to cover the holes that are used for bolting down the hard top above the water fall., other than just using the plastic plugs.
Great question. As ugly as those plugs are I don’t believe there are many options. I had hoped to use white vinyl and wrap them but open to suggestions!
Thanks Nick
Nick – the stock coil overs are stiff and the ride rough – I see you swapped out the coil overs –
Any feedback on your ride experience with the new coil overs and what did you wind up ordering – it looks as if you need custom lengths and spring size – I want to put more miles on my car – just trying to get all the bugs out – Thanks again for the website and you knowledge – wishing you and you family a Happy Thanksgiving!
11 responses to “Discussion & Comments”
Today January 1st 2021 is the official launch date of my build site, nicks33hotrod.ca
You can leave comments, sign up for updates and watch the final stages of this 8 year project.
Nick – great site – It has really inspired and helped me to get my car back on track to be completed.
I just ordered the center console from Dan. Yours turned out great. Any suggestions or issues you had installing yours.
Thank you!!!!
Trimming to fit, but no issues at all really
Would you happen to have the magnaflow mufflers you used on your 33?
I used 14362’s but the 11365 is the same just not polished finish.
They are a bit shorter and wider but using their clamps you can make up the difference. Hangers etc all have to be re-thought too.
I used a pipe speader to install them so that the joints all pointing down stream, but i doubt it makes a difference.
Basically it’s not just a slip in change but not difficult.
You can hear them here – https://youtu.be/V_RpNbKkxU8
I just did a Barrymans tuneup (Seafoam/Barrymans) OMG god the smoke! The car has been sitting for 2 years so i figures things may be stuck a bit LOL
what are you planning to do to cover the holes that are used for bolting down the hard top above the water fall., other than just using the plastic plugs.
Great question. As ugly as those plugs are I don’t believe there are many options. I had hoped to use white vinyl and wrap them but open to suggestions!
Thanks Nick
Nick can you send me the plans for the side window install please
Sure. I have to dig files out. Email me at [email protected] and i will reply to that
Nick – the stock coil overs are stiff and the ride rough – I see you swapped out the coil overs –
Any feedback on your ride experience with the new coil overs and what did you wind up ordering – it looks as if you need custom lengths and spring size – I want to put more miles on my car – just trying to get all the bugs out – Thanks again for the website and you knowledge – wishing you and you family a Happy Thanksgiving!